Transparency Material
Positive or negative, color or black and white roll film. Width: 70mm, 5" (12.7cm), or 9 3/8' (23.8cm). Maximum length: 400' (122m). Accommodates standard film spools, 2" (5cm) minimum core diameter.

Printing Material
Color or black and white paper or film roll (500' maximum, emulsion in) in widths from 70mm to 9 3/8" (23.8cm). Accommodates 12" diameter roll (2"/5cm core diameter).

Printing Light
Tri-color light source derived from three individually filtered tungsten halogen lamps.

Color Correction
The red, green and blue components of the light source are controlled by four front panel controls. Three adjust the color components to provide the selected color balance; the fourth adjust intensity without affected color. Color balance settings are displayed as the equivalent YMC color filtration. Each "filter" may be adjusted over a 0 to 1.2 density range.

Exposure control
Exposure is controlled by the transport or printing speed, and the lamp intensity control. The control range is greater than 4:1.

Electric Requirements
115VAC 16 amps, or 230VAC 8 amps (must be selected at time of order). The printer is internally regulated against line voltage changes of + or - 10%.

Basic Statictics
Transport Speed: Continuously variable, from about 6-60 feet (1.8-18m)/minute.
Contact: Emulsion-to emulsion
Resolution: Normal 200 lines/millimeter with suitable material and target resolution
Static Control: For certain materials, pre-conditioning to enhance moisture content, auxiliary static control devices, and/or environmental humidity controls may be needed to minimize static discharge marking of film or paper.
Dimensions: (Approximate) Width: 40" (102cm) Depth: 25" (64cm) Height: 68" (173cm)
Weight: 620lbs. (282kg)

* Specifications are subject to change without notice.