Transparency Material
Positive or negative roll film (400'(122m)max) in 70mm, 5" (12.7cm) or 9 3/8": (23.8cm) accommodates standard film spools (2"(5cm)min. core diameter).

Printing Material
Film-base or paper-base roll (500'maximum, emulsion in) in widths from 70mm to 9 3/8" (23.8cm) accommodates 12" (30.5cm) diameter roll (2"(5cm) min. core diameter).

Printing Light
10" (25.4cm) diameter cathode ray tube.

Exposure Control
Exposure level of the reproduction held constant within 20 per cent for transparency average density range from 0.3 to 1.8 by d-c coupled inverse feedback from a photo multiplier tube to printing light source. Intensity of the scanning spot is automatically and instantaneously modulated inversely according to negative density by a-c amplified output of a second photo multiplier tube.

Electric Requirements
115VAC 50-60Hz. 8 amperes or 230VAC 4 amperes. Printer is internally regulated against line voltage changes between 105 and 130V.

Basic Specifications
Transport Speed: Continuously variable, from about 6-60 feet (1.8-18m)/minute.
Contact: Emulsion-to emulsion
Resolution: Normal 200 lines/millimeter with suitable material and target resolution
Static Control: For certain materials, pre-conditioning to enhance moisture content, auxiliary static control devices, and/or environmental humidity controls may be needed to minimize static discharge marking of film or paper.
Dimensions: (Approximate) Width: 40" (102cm) Depth: 25" (64cm) Height: 68" (173cm)
Weight: 620lbs. (282kg)

* Specifications are subject to change without notice.